EPC introduces the 100 V, 1 mOhm EPC2361 GaN FET in a compact 3 mm x 5 mm QFN package, offering higher power density for DC-DC conversion, fast charging, motor drives, and solar MPPTs. EPC, the world’s leader in enhancement-mode gallium nitride (GaN) power FETs and ICs, launches the 100 V, 1 mOhm EPC2361. This […]
epc
Three eval boards feature pulse current laser drivers of 70, 125, and 231
EPC introduces three evaluation boards – EPC9179, EPC9181, and EPC9180 – featuring pulse current laser drivers of 75 A, 125 A, and 231 A, showcasing EPC’s AEC-Q101 GaN FETs. These FETs; EPC2252, EPC2204A, and EPC2218A are 30% smaller and more cost-effective than their predecessors. Designed for both long and short-range automotive lidar systems, these boards […]
Two 40 V GaN devices address spacebar and other hi-rel applications
EPC announces the introduction of two new 40 V-rated radiation-hardened GaN FETs. EPC7001 is a 40 V, 4 mΩ, 250 APulsed, rad-hard GaN FET in a small 7 mm2 footprint. EPC7002 is a 40 V, 14.5 mΩ, 62 APulsed, rad-hard GaN FET in a tiny 1.87 mm2 footprint. Both devices have a total dose radiation […]
eGan IC-based reference design addresses USB PD 3.1
EPC announces the availability of the EPC9177, a digitally-controlled, single-output synchronous buck converter reference design board operating at 720 kHz switching frequency converting an input voltage of 48 V, 36 V, and 28 V to a regulated 12 V output voltage and delivering up to 20 A continuous output current. The small area (21 mm […]
Controller-GaN FET combo for designs of 140 W small fast-charging devices
EPC & Richtek announces the availability of a 4-switches bidirectional buck-boost controller reference design board that converts an input voltage of 12 V – 24 V to a regulated 5 V – 20 V output voltage and delivers up to 5 A continuous current and 6.5 A maximum current. The combination of the new Richtek […]
GaN FETs feature low on resistance with 150/200-V ratings
EPC introduces the 150 V, 3 mΩ EPC2305 and the 200 V, 5 mΩ EPC2304 GaN FETs in a thermally enhanced QFN package with an exposed top and tiny 3 mm x 5 mm footprint. These devices are the lowest on-resistance (RDS(on)) FETs in the market at 150 V and 200 V in a size that […]
eGaN power FETs feature high power density, tiny footprint
EPC launches the 80 V, 4 mOhm EPC2619. This is the lead product for a new generation of eGaN devices that have double the power density compared to EPC’s prior-generation products. The EPC2619 has an RDS(on) of just 4 mOhms in a tiny, 1.5 mm x 2.5 mm, footprint. The maximum RDS(on) x Area of […]
GaN 3-phase BLDC motor drive delivers 20 A
EPC announces the availability of the EPC9176, a 3-phase BLDC motor drive inverter using the EPC23102 ePower Stage GaN IC with embedded gate driver function and two GaN FET with 5.2 mΩ typical RDS(on). The EPC9176 operates from an input supply voltage between 20 V and 80 V and can deliver up to 28 Apk […]
Dispelling Myths: Don’t believe it when they say you need a bipolar gate drive for eGaN FETs
Use of a negative gate drive can lead to a larger voltage drop during deadtime and severe losses. Andrea Gorgerino, EPC GaN devices have gone from initial R&D to mainstream designs over the last 15 years. Unfortunately, there are many misunderstandings left-over from those early-stage developments or dead-end technology branches. One of the most pernicious […]
GaN FETs optimized for 48-V dc-dc power conversion
EPC expands the selection of off-the-shelf GaN FETs in thermally enhanced QFN packages with the introduction of the 100 V EPC2306 designed for 48 V DC-DC conversion used in high-density computing applications, in 48 V BLDC motor drives for e-mobility and robotics, and in solar optimizers and microinverters, and Class D Audio. The EPC2306 GaN […]
