EPC announces the introduction of a 100 V, 35 A integrated circuit designed for 48 V DC-DC conversion used in high-density computing applications and in 48 V BLDC motor drives for e-mobility, robotics, and drones. The EPC23102 eGaN IC is capable of a maximum withstand voltage of 100 V, delivering up to 35 A load […]
epc
Rad-hard GaN FET comes in small 6.56-mm-sq footprint
EPC announces the introduction of the EPC7004 radiation-hardened GaN FET. The EPC7004 is a 100 V, 7 mΩ, 160 APulsed, rad-hard GaN FET in a small 6.56 mm2 footprint. The EPC7004 has a total dose radiation rating greater than 1 Mrad and SEE immunity for LET of 85 MeV/(mg/cm2). The EPC7004, along with the rest […]
Rad-hard 100-V GaN transistor offers lowest on-resistance
EPC has introduced the EPC7018 radiation-hardened GaN FET. The EPC7018 is a 100 V, 3.9 mΩ, 345 APulsed, rad-hard GaN FET in a small 13.9 mm2 footprint. The EPC7018 has a total dose radiation rating greater than 1 Mrad and SEE immunity for LET of 85 MeV/(mg/cm2). The EPC7018, along with the rest of the […]
Common-source dual GaN FET features 58 mΩ RDS(on), 20-A pulsed output current
EPC announces the introduction of the EPC2221, a common source dual gallium nitride FET rated at 100 V, 58 mΩ, and 20 A pulsed current. The EPC2221 can be used in lidar systems for robots, surveillance systems, drones, autonomous cars, and vacuum cleaners. The low inductance and capacitance of the EPC2221 allow fast switching (100 […]
350-V GaN transistor features max 80 mΩ on resistance, 26-A pulsed output
EPC announces the production release of the EPC2050, a 350 V GaN transistor with a maximum RDS(on) of 80 mΩ and a 26 A pulsed output current. The EPC2050 measures just 1.95 mm x 1.95 mm. This tiny size enables power solutions that occupy ten times less area than comparable silicon solutions. Applications benefiting from […]
Rad-hard GaN transistors sport super-low on resistance
EPC announces the introduction of the EPC7019 radiation-hardened eGaN FET. The EPC7019, a 40 V, 1.5 mΩ, 530 APulsed, rad-hard eGaN FET in a small 13.9 mm2 footprint. The EPC7019 has a total dose rating greater than 1 Mrad and SEE immunity for LET of 85 MeV/(mg/cm2). These devices are offered in a chip-scale package, […]
Dual-output synchronous buck reference design board converts 9 to 24-V input to 3.3 or 5-V output
EPC announces the availability of the EPC9160, a dual output synchronous buck converter reference design board operating at 2 MHz switching frequency that converts an input voltage of 9 V to 24 V to a 3.3 V or 5 V output voltage and delivers up to 15 A continuous current for both outputs. Thanks to […]
Compact BLDC motor drive inverter design targets e-bikes, drones, robotic apps
EPC announces the availability of the EPC9167, a 3-phase BLDC motor drive inverter using the EPC2065 eGaN FET. The EPC9167 operates from an input supply voltage between 14 V and 60 V (nominal 48 V) and has two configurations – a standard unit and a high current version: The EPC9167 standard reference design board is […]
Reference design details super-efficient bi-directional dc/dc converter
EPC announces the availability of the EPC9165, a 2 kW, two-phase 48 V – 14 V bidirectional converter that operates with 97 % peak efficiency in a small footprint. This solution is ideal for high-density and high-power 48V battery packs such as those required for eMobility and light mobility. The solution is scalable; two converters […]
eGaN bidirectional dc/dc converter handles 65-A loads
EPC announces the availability of the EPC9170, a 2 kW, two-phase 48 V – 14 V bidirectional converter that operates with 96.8% peak efficiency in a small footprint. The board features the ePower 100 V, 65 A integrated circuit chipset. The chipset includes the EPC23101 eGaN IC plus EPC2302 eGaN FET for a solution capable […]
