When an application requires fast motion with a stroke over a couple of inches, a brushless linear motor stage will meet the needs of long travel and fast motion when coupled with a motion control system with servo amplifiers and a motion controller. Brushless linear motor stages can be coupled as a gantry for pick-and-place […]
Three-phase
Three-phase MOSFET gate driver optimized for BLDC motor drives
TRINAMIC Motion Control GmbH & Co. KG introduces the fully integrated TMC6140-LA 3-phase MOSFET gate driver that simplifies design and maximizes the battery life of brushless direct current (DC) motor drives. The TMC6140-LA 3-phase MOSFET gate driver integrates all three bottom shunt amplifiers to provide a complete motor drive solution with 30-percent improved power efficiency while […]
PDUs support 240/415Vac 3-phase power distribution
Gateview Technologies announces its support of 240/415VAC 3-Phase WYE rack configurations with its new PowerLok 8700-8800 Series Rack Power Distribution Units (rPDUs). These next-generation PDUs address the increasing adoption of 415VAC 3-phase power as data center operators seek to maximize efficiency while ensuring uptime for their mission-critical equipment. By increasing the voltage of power-distributed IT equipment, transformer […]
Programmable 3-phase 5-kW ac-dc supplies provide constant voltage/current output
The latest addition to the high power range of digital programmable 3 phase 5kW AC-DC power supplies offers flexible operation with uncomplicated low line input requirements. The new HPL5K0 series offers both constant voltage and constant current operation, along with the flexibility and user configurability needed for applications such as LED curing and heating, 2D […]
Modular power supply provides 385 Vdc for distributed power and dc microgrids
TDK Corporation announces the introduction of the TDK-Lambda brand TPF45000-385 non-isolated modular AC-DC power supply. Developed for use in distributed power architectures (DPA) and DC Microgrids, the 98% highly efficient TPF45000 provides a regulated 385Vdc output with a current of up to 117A. Low internal losses enable the use of cooling by fans, avoiding the […]
Multi-chemistry battery chargers designed for energy storage apps
Applied Power Systems (APS) is offering its latest three-phase industrial battery charger, the SmartCharger Series intelligent multi-chemistry battery chargers. The BC6837 SmartCharger Series intelligent multi-chemistry battery chargers are designed for energy storage applications with a wide range of battery voltages and power levels. Features include High efficiency, high-frequency chargers; For EV, Marine, Transit, Backup, or […]
Pint-sized surface mount fuse handles up to 50 A
SCHURTER’s prominent UMT-H surface mount ceramic fuse family now includes 40 A and 50 A current ratings with an impressive breaking capacity rating of 500 A at 125 VAC / 72 VDC. The series provides unprecedented overcurrent and short circuit protection performance in a package size of 5.3 x 16 mm. The UMT-H was originally […]
Bi-directional 22/25-kW liquid-cooled inverter battery charger targets EV, HEV apps
Bel Power Solutions announces the BCL25-700-8, a 22/25 kW bi-directional liquid-cooled on-board inverter battery charger with export functionalities for hybrid (HEV) or fully electric (EV) vehicles, as well as medium and heavy-duty on- and off-highway vehicles. The BCL25-700-8 is parallelable up to 4 units in charge mode, with typical efficiency up to 94%. With the […]
Three-phase half-bridge driver ICs control brushless motors for e bikes, power tools
STMicroelectronics has created an integrated three-phase half-bridge driver IC with performance optimized for low-voltage industrial applications up to 75V, delivering a space-efficient and power-saving solution to control three-phase brushless motors in e-bikes, power tools, pumps, fans, light machinery, gaming consoles, and other equipment. The STDRIVE101 embeds three half-bridge drivers for external N-Channel MOSFETs, each able to sink […]
Low-profile three-phase supply outputs up to 200 Vdc
XP Power announces the addition of a low-profile enclosure to the HPT5K0 series of high-power density, high efficiency, 5kW AC-DC power supply modules. In common with the existing products in the range, the new HPT5K0-L units feature a three-phase, three-wire & earth, 180 to 528VAC input and they carry ITE/industrial and medical agency approvals. The […]
