Vishay Intertechnology, Inc. introduced the industry’s first 1 Form A solid-state relay to offer AEC-Q102 qualification and a 100 V load voltage. Offered in the low profile SOP-4 package, the Vishay Semiconductors VORA1010M4 delivers the industry’s fastest turn-on and turn-off times of 0.1 ms typical, in addition to the highest operating temperature of +125 °C. […]
Automotive
Asymmetrical TVS diode protects SiC MOSFETS
Littelfuse, Inc. announced the SMFA Asymmetrical Series Surface-Mount TVS Diode, the first-to-market asymmetrical TVS solution specifically designed to protect Silicon Carbide (SiC) MOSFET gates from overvoltage events. As SiC MOSFETs become increasingly popular due to their faster switching speeds and superior efficiency compared to traditional Silicon MOSFETs and IGBTs, the need for robust gate protection […]
Isolation transformer operates from 10 V to 24 V
Bourns, Inc. introduced a new AEC-Q200 compliant, automotive grade, low profile, high creepage isolation transformer. The Bourns Model HVMA03F4A-LP8S Series flyback transformer is designed to support high power density for greater efficiency in a compact form factor. These capabilities are required in a wide range of applications, including gate drives and high-voltage battery management systems (BMS). This […]
Gas-discharge tubes protect circuits to 7200 V
Bourns, Inc. announced its Model SA2-A High Voltage Gas Discharge Tube (GDT) Series. This latest addition to Bourns’ broad AEC-Q200 compliant portfolio is engineered to meet the rigorous demands of certain harsh environment applications that require exceptional reliability, durability, and adherence to regulatory standards. Matching the need for advanced surge protection that addresses the evolving requirements of […]
Transformer drivers enable compact, low-noise isolated power supplies
Nexperia introduced the NXF6501-Q100, NXF6505A-Q100, and NXF6505B-Q100. These are AEC-Q100 qualified, push-pull transformer drivers that enable the design of small, low-noise, and low-EMI isolated power supplies for a range of automotive applications like traction inverters and motor control, DC-DC converters, battery management systems and on-board chargers in electric vehicles (EV). These transformer drivers are also […]
DFN package MOSFETs feature side-wettable flanks
Nexperia announced the release of single and dual small-signal MOSFETs in miniature DFN packages. The automotive-qualified devices are available in DFN1110D-3 and DFN1412-6 respectively. Particularly the DFN1110D-3 (1.1mm x 1 mm) package has seen increasingly wide adoption and is quickly becoming the ‘de-facto’ industry standard package for small-signal MOSFETs and bipolar transistors intended for use […]
MLCCs offered in 99 nF/1000 V and 47 μF/100 V options
TDK Corporation has expanded its automotive-grade CA series of MEGACAP MLCCs with a metal frame, commencing mass production in September 2024. The CA series MLCCs measure 6.00 x 5.60 x 6.40 mm and feature a 3-line type structure. The lineup includes 99 nF/1000 V variants with a Class 1 dielectric and 47 μF/100 V variants […]
40 V automotive MOSFETs offer 75 percent weight reduction
Magnachip Semiconductor Corporation announced the release of four new 40V 1)MXT MV MOSFETs designed in Power Dual Flat No-Lead (PDFN) 33 packages for automotive applications. As automotive technologies like autonomous driving and infotainment systems advance, the number and variety of motors installed in vehicles are increasing. Consequently, there is a growing importance for high-performance MOSFETs […]
Power BJTs available in DFN2020D-3 packaging with 50 V and 80 V ratings
Nexperia announced the latest extension to its popular portfolio of power bipolar junction transistors (BJTs) with the release of ten standards and ten automotive-qualified products in DFN2020D-3 packaging. These new devices, available in 50 V and 80 V ratings and supporting current ranges from 1 A to 3 A in NPN and PNP polarity, further […]
0201-size, automotive-grade resistors bring enhanced reliability in consumer and industrial applications
Many types of electronic devices now benefit from the higher reliability of automotive grade resistors. By specifying automotive grade resistors, design engineers in any market segment can increase electrical stability and environmental reliability without the significant increase in cost normally associated with established reliability resistors. Stackpole’s RMCA series is AEC Q200 qualified and provides excellent long-term reliability. The […]
