Bel Fuse Inc announced the expansion of its RCM Series of converters with the RCM300 Series dual output DC-DC converter for railway and transportation systems. The dual output converters are reliable power supplies, delivering 300 W at +24 V / – 24 V, the two input voltage ranges covering all common railway batteries. The two […]
Converters
30 W charge pump charger features 1:2 reverse boost mode
Halo Microelectronics announces the launch of its HL7132D, a dual-phase 30 W charge pump with 1:2 reverse boost mode. The HL7132D is a low-voltage fast direct charger for 1-cell Li-ion and Li-polymer batteries. The device integrates a dual-phase switched capacitive converter and reverse blocking MOSFET (QRB FET) while achieving over 97 percent efficiency at 4.5 […]
150 and 200 W dc-dc converters with 12:1 input range
Traco Power announces their new TEP 150UIR and TEP 200UIR families of 150 and 200 watt DC/DC converters with a 12:1 input range (14-160VDC) in a fully-encapsulated half brick package. These converters enable design engineers to utilize a single power supply solution that accepts an array of nominal system voltages, including 24/48/72/110 VDC input. The […]
1 W dc-dc converter in DIP-8 package
Traco Power announces their new cost-efficient TDU 1 series of one-watt un-regulated DC-DC Converters with 1,500 VDC isolation in the ultra-miniature DIP-8 package. The TDU 1 series consists of nine models offering 5 / 12 / 24 Vin (±10% input range) and single un-regulated outputs of 5 / 12 / 15 Vout. The converter is […]
1 Watt SIP or SMD converter
Traco Power announces their TRI 1 (SIP-8) and TRI 1SM (SMD-14) families of 1-watt high isolation and regulated DC/DC converters for industrial, transportation, and instrumentation applications. Both SIP and SMD families feature: TRI 1 (SIP-8 models) offer 5 / 12 / 15V outputs TRI 1SM (SMD-14 models) offer 5 / 12 / ±12 / 15 […]
DIN rail dc-dc converters boost control cabinets’ input power
Antaira Technologies launched two DIN Rail mounted DC-DC converters able to boost the 9-36VDC input power typical of control cabinets to a maximum adjustable output of 53VDC and either up to 480 watts (DTD-480-0953-T) or 360 watts (DTD-360-0953-T). Exceptionally rugged and compact, the new DTD power converters are shielded from industrial environments within an IP30 […]
Converter boasts 90 percent efficiency at low current as low 10mA
Halo Microelectronics announces the launch of its latest addition to the buck converter product line, the HL7543, designed specifically for wearable devices, and its high efficiency makes it an ideal choice for battery-powered devices. The HL7543 features an input voltage range between 2.3V to 5.5V delivering up to 600mA high efficiency while maintaining over 90% […]
Encapsulated 300 W dc-dc converters meet MIL-spec shock and vibration performance.
TDK Corporation announces the introduction of the 300W-rated TDK-Lambda RGC series of ruggedized non-isolated DC-DC converters. Operating from an input voltage of 9 to 53V, the step-up/step-down converters deliver output voltages that can be adjustable from 9.6 to 48V or 5 to 28V with output currents of up to 12.5A. The series is designed to […]
Synchronous buck converters provide offer output current ratings of 5A and 8A
Diodes Incorporated has announced new additions to its synchronous buck converter portfolio. With continuous output current ratings of 5A and 8A respectively, the AP62500 and AP62800 offer the flexibility engineers need to develop point-of-load (POL) solutions that are optimized for either efficiency or size. Enabling compact implementations with a minimal component count, these devices are targeted at […]
Transformers address aerospace applications
Vanguard Electronics is launching a new line of space-saving power converters, the Auto Transformer Rectifier Unit, or ATRU series. The line ranges from units with 2 kW to 10 kW power ratings and includes the TRU-12-2, TRU-12-5, TRU-18-5, TRU-18-10, TRU-30-5, and TRU-30-10 models. Ideal for military applications and avionics where space and weight are at […]
