Murata has released two new automotive common mode choke coils intended for noise suppression in high-speed interfaces that use Serializer/Deserializer (SerDes) on Power Over Coax (PoC). In-vehicle cameras have become increasingly popular in the autonomous vehicle market. SerDes is typically used in image data transmission interfaces. This, in turn, has led to the deployment of […]
Chokes
Common-mode chokes optimized for high-speed interface noise suppression
Murata has released two automotive common mode choke coils intended for noise suppression in high-speed interfaces that use Serializer/Deserializer (SerDes) on Power Over Coax (PoC). Since this application requires a higher current compared to conventional differential interfaces, the DLW21SH391XQ2 and DLW21PH201XQ2 were developed specifically to handle a range from 300mA to 500mA. With sensor nodes becoming more compact, […]
Chokes handle up to 3kA gigaHertz-range frequencies
SMP Sintermetalle Prometheus GmbH & Co KG (SMP) offers chokes for medical technology applications. These inductive components are used in Magnetic Resonance Imaging (MRI) or Computed Tomography (CT), for example. Designed as filter or mains chokes they are not only compact, low-loss, and energy-efficient but also exceptionally quiet in operation – essential qualities for demanding […]
Compact current-compensated ring core double chokes handle 300 MHz filtering chores
TDK Corporation presents a new series of very compact current-compensated EPCOS power line ring core double chokes for very high frequencies. The B82791H2*N010 series is available with current ratings from 1.5 A to 4 A at a nominal ambient temperature of +70 °C without derating, and for a nominal voltage of 250 V AC (50/60 […]
Common-mode chokes target power supply applications
Würth Elektronik is expanding its portfolio of common-mode chokes with two new models. The THT-mountable WE-FCLP for common-mode and differential-mode suppression, and the SMT data line and low-voltage common mode choke WE-CMDC. Both are available from stock without a minimum order quantity. The WE-FCLP has a compact design with a maximum height of 14.5 mm, yet […]
Current-compensated chokes for PCB mounting handle up to 50 A
SCHURTER expands its range of current-compensated chokes for printed circuit board mounting, to include a vertical design for 1-phase high current applications. The new DKIV-1 sports a compact design and smaller footprint due to its vertical orientation. The series is available with ferrite or nanocrystalline core for a wide range of rated currents from 10 […]
