Murata announced the D1U54-D-1200 series of DC-input front end power supply modules from Murata Power Solutions. This 1000VRMS isolated power supply provides a 12Vdc output at 1200 Watts, with a standby voltage at up to 20 Watts of power. With a power density of 28 watts per cubic inch, the slim 54.5mm (2.15“) width and […]
murata
Converters work with IGBT gate drives
Murata has announced the MGJ3 and MGJ6 series of configurable output voltage, high isolation DC-DC converters from Murata Power Solutions. These 3 Watt and 6 Watt surface mounted devices are optimized for use as high-side and low-side gate drivers in IGBT and MOSFET bridge circuit designs. Providing triple output voltages of +15, +5 and +5 […]
1300 Watt model for D1U3CS series of front-end AC-DC power supplies from Murata Power Solutions
Murata announced the addition of a 1300 Watt model to their D1U3CS series of front-end AC-DC power supplies from Murata Power Solutions. The D1U3CS 1300 series can deliver 1,300 Watts from the wide 108 to 264 VAC universal input, is hot pluggable, has no minimum load requirement, and incorporates low-loss integral O-Ring Field Effect Transistors […]
OKDX-T/40 : Murata introduces digital 40 AMP 132 Watt POL DC-DC Converter
Murata announced today the addition of the OKD series of non-isolated point-of-load (PoL) DC/DC converters from Murata Power Solutions. Available in three different package formats, through-hole, single-in-line, and surface mount, the OKDx-T/40 is a 40 Amp, 132 Watt digital DC/DC converter. These highly efficient (typically 97.2%), fully regulated converters offer a high power density and […]
Murata’s NCM6 Series 6 Watt Encapsulated DC-DC with 4:1 Input Range
Murata announced the NCM6 series of isolated 6 Watt single and dual output DC/DC converters from Murata Power Solutions. Accommodating up to an ultra-wide 4:1 input range, these DC-DC converters are available in three nominal input voltage ranges of either 5 VDC input (4.5 – 9 VDC 2:1 range), 12 VDC (9 – 36 VDC […]
AC-DC Power Supplies from Murata Power Solutions
Murata announced the introduction of its MVAD040 and MVAD065 open frame, convection cooled AC-DC power supplies. Packaged in the industry standard 2 x 4 inch format with a low profile, 1U compatible 1.3 inch height (50.8 x 101.6 x 33.02 mm), the low power MVAD series is suitable for use in a wide range of […]
Murata’s 100-to-120-W dc-dc converters for embedded computing
The UWE series is a 100-to-120-W, eighth-brick, DC-DC converter for embedded computing applications, instrumentation subsystems, and military embedded systems. The open frame isolated DOSA-compatible power electronics devices provide an efficiency of typically 91.5 percent, which requires no forced-air cooling in most applications. This series uses industry-standard through-hole package, and measures 2.3 x 0.9 x 0.39 […]
