Murata has introduced the BLM18KN_EH series of chip ferrite beads for noise suppression in power lines at temperatures up to 175°C. Target automotive applications include engine and transmission electronic control units (ECUs) and turbo motor controllers. The components also meet AEC-Q200 qualification requirements. The new line is available in a 0603 size with dimensions of 1.6 mm […]
murata
AEC-Q200-compliant inductors boast broadband impedance for in-vehicle PoC systems
Murata continues to support ongoing engineering progression within the automotive sector with the introduction of the LQW21FT_0H series. These are the world’s smallest inductors with broadband impedance for in-vehicle power-over-coax (PoC) circuits of SerDes-based interfacing. The LQW21FT_0H series is compliant with AEC-Q200 and delivers a combination of both broadband impedance and high-current performance. Thanks to […]
Compact dc-dc converters feature high heat resistance, up to 6-A output
Murata today introduced several new non-isolated DC/DC converter lines for distributed power architecture applications. The UltraBK™, MonoBK™, and PicoBK™ series were developed to provide small size, high efficiency, decreased noise, low EMI, and take up less board space. These products address the design challenges impacting today’s communication, storage, and server applications along with the exacting demands of the […]
Ruggedized AC/DC converter lines feature industrial temperature ranges
Murata today introduced several AC/DC converter product lines developed for the Industrial, Automation, IoT, Smart Buildings, Medical, and Security markets – the BAC1, BAC3, and BAC05. These solutions feature wide industrial temperature ranges and have been ruggedized to operate efficiently in the most demanding environments. Further, with reinforced insulation, they deliver unsurpassed safety qualifications for both AC […]
Chassis-mount 10:1 dc-input-range converters offer 300-W with 92% efficiency
Murata announced a new 300 W chassis mount ultra-wide 10:1 DC input range converter with patented inrush current control topology and high efficiency >92% from Murata Power Solutions. The IRV300 is a fit-and-forget module designed for harsh operating environments in railway and industrial applications. It conforms to EN50155, EN50121, and EN45545, and has an operating […]
Quarter, half-brick dc-dc converters sport 91% efficiency with a 16 – 160 Vdc input range
Murata announced two new ultra-wide 10:1 ratio DC-DC converters, the 250W IRH-W80 half-brick and the 150W IRQ-W80 quarter-brick from Murata Power Solutions. Both high power density modules feature efficiency levels above 91 percent with a 16 – 160 Vdc input voltage range. The 250W IRH-W80 and 150W IRQ-W80 modules are designed for embedded applications in […]
Chip Ferrite Beads for automotive applications handle up to 175°C
Murata has announced the release of the BLM18KN_EH series of chip ferrite beads for noise suppression in power lines at temperatures up to 175°C. Target applications are automotive equipment such as engine and transmission electronic control units (ECUs) and turbo motor controllers, with the components meeting AEC-Q200 qualification requirements. As electrification advances, the demand for […]
Eighth brick 600-W converter targets telecom apps
Murata today introduced its DRE-11.4/53-L48 eighth brick Intermediate Bus Converter (IBC) from Murata Power Solutions. The product series addresses the growing power requirements of networking and telecommunications infrastructure equipment by delivering the highest efficiency in the industry at this power output level and small package size. It is ideal for applications that require a highly efficient, 600W […]
Line filters are designed to replace discontinued Murata Components
Premier Magnetics announces the in-stock availability of its PMCU Series of common mode line filters designed for switching power supply applications. Offered in both standard winding (for higher efficiency) and sectional winding (for improved high-frequency performance), the PMCU line models provide a direct cross for over three dozen PLA10ANxxx and PLA10ASxxx EMIFIL series components recently […]
Power-supply noise, Part 2
Part 1 looked at the basics of noise, especially concerning power supplies. There are two noise sources which are not as obvious to many engineers as noise that results from the switching action of the power supply: differential mode noise and common-mode noise. These two noise modes have different causes and thus different solutions Q: […]
