Flex Power Modules introduces a new device to their range of quarter brick non-isolated DC/DC converters that take power densities to new levels. The BMR351 has a 40-60 V input range and delivers a non-isolated but fully regulated output of 12.2 V nominal. The rated output current is 136 A continuous (1600 W max) and […]
DC-DC
150 and 200 W dc-dc converters with 12:1 input range
Traco Power announces their new TEP 150UIR and TEP 200UIR families of 150 and 200 watt DC/DC converters with a 12:1 input range (14-160VDC) in a fully-encapsulated half brick package. These converters enable design engineers to utilize a single power supply solution that accepts an array of nominal system voltages, including 24/48/72/110 VDC input. The […]
1 W dc-dc converter in DIP-8 package
Traco Power announces their new cost-efficient TDU 1 series of one-watt un-regulated DC-DC Converters with 1,500 VDC isolation in the ultra-miniature DIP-8 package. The TDU 1 series consists of nine models offering 5 / 12 / 24 Vin (±10% input range) and single un-regulated outputs of 5 / 12 / 15 Vout. The converter is […]
1 Watt SIP or SMD converter
Traco Power announces their TRI 1 (SIP-8) and TRI 1SM (SMD-14) families of 1-watt high isolation and regulated DC/DC converters for industrial, transportation, and instrumentation applications. Both SIP and SMD families feature: TRI 1 (SIP-8 models) offer 5 / 12 / 15V outputs TRI 1SM (SMD-14 models) offer 5 / 12 / ±12 / 15 […]
DIN rail dc-dc converters boost control cabinets’ input power
Antaira Technologies launched two DIN Rail mounted DC-DC converters able to boost the 9-36VDC input power typical of control cabinets to a maximum adjustable output of 53VDC and either up to 480 watts (DTD-480-0953-T) or 360 watts (DTD-360-0953-T). Exceptionally rugged and compact, the new DTD power converters are shielded from industrial environments within an IP30 […]
AC-DC front-end power supply converts up to 277 V AC into 42 – 58 V DC
Bel Fuse Inc announces the expansion of its portfolio to include the TET3600-48-104RA, a 3.6 kW Titanium efficient AC-DC front-end power supply that can convert up to 277 VAC into a main adjustable (42-58 VDC) output for powering high-performance Datacenter, Network, Industrial and Broadcast applications. The TET3600 delivers a power density of 56 W/in3 and […]
DC link capacitors designed for low inductance and low-loss winding
New Yorker Electronics has announced the release of the new 944L Series of low inductance, high current DC link film capacitors from Cornell Dubilier Electronics (CDE). Type 944L DC Link capacitors are specifically designed for fast-switching power conversion applications. Their low inductance construction and low-loss winding technology make them ideal for the next generation of […]
PMIC recharges battery or capacitor using energy harvesting
Nexperia announced an expansion to its range of Power ICs with Energy Harvesting solutions to simplify and enhance the performance of low-power Internet of things (IoT) and other embedded applications. The NEH2000BY is a high-performance power management integrated circuit (PMIC) that recharges a battery or storage capacitor using energy harvested from ambient sources, such as […]
APEC 2023 round-up
The Applied Power Electronics Conference (APEC) has grown over the course of a few decades to be the leading conference in North America for power electronics professionals. This past month, March 19th to the 23rd, in Orlando, APEC returned to share the latest trends, technologies, and opportunities in power electronics with industry and academia alike. […]
LDO delivers max output current of 150mA for PoL applications
Diodes Incorporated has introduced the AP7387Q low dropout (LDO) linear voltage regulator. Delivering a maximum output current of 150mA, this device has a wide input voltage of 5V to 60V and a dropout voltage of 700mV (typical) at a 100mA output current. It provides engineering teams with a simple-to-implement point-of-load (PoL) solution for automotive audio, […]
