The ArchiLume Series of LED drivers from ERG Lighting has the slim 100W drivers requiring an elegant look with smooth, flicker-free dimming and constant voltage output up to 100 watts with very low ripple. They are ideal for applications such as architectural (office, hospitality, commercial, institutional), high-end retail (in-store displays, showrooms), home (kitchen, bathroom) and […]
LED Lighting
Global Lighting Technologies Retrofits Building With LED Lighting
Global Lighting Technologies has retrofitted its North American sales & engineering headquarters with LED ceiling lights. In a classic example of practicing what it preaches, GLT has replaced the facility’s existing fluorescent lights with its UL-certified LED-based 2’x2′ and 1’x4′ ceiling lights throughout the building. The new lights utilize GLT’s edge-lit light guide technology, where the […]
Phihong adds Dimmable Models to Waterproof LED Series
Phihong USA has expanded its PDA072 and PDA080 constant voltage LED driver series with 0-10V dimming models. The new PDA072 Series addition, designated the PDA072W-24VG-R, is rated for outputs of 72W at 24VDC and the new PDA080 Series addition, designated the PDA080W-48VG-R, is rated for outputs of 80W at 48VDC. Both the PDA072 and PDA080 […]
Dialight LED Family Receives DesignLights Consortium Certification
Dialight announced the listing of their 14,000 lumen DuroSite and SafeSite LED High Bay family on the DesignLights Consortium’s Solid State Lighting Fixtures Qualified Products List. Posting on the DLC list identifies the fixture as eligible for valuable utility rebate programs at the discretion of participating DLC utility partners and validates the High Bay’s exceptional energy […]
Future trends and challenges of the LED lighting business
The introduction of LEDs has the lighting industry facing many new challenges. With the introduction of LEDs the “digital era” began. This sped up development cycles so much that manufacturers are always busy developing new products. The lighting industry is used to relatively slow product development cycles – typically 9-12 months to introduce new products. […]
Podcast: Digital Controller Technology for Solid-State Lighting
Ikon Semiconductor’s integrated circuit (IC), for the dimmable LED retrofit market, is designed to meet cost and performance standards for today’s LED lighting products, while enabling greater design simplicity for bulb manufacturers and OEMs. Its IC solutions match the efficiency of comparative two-stage architectures, but with up to 25 percent fewer components. With broad dimmer […]
Magnalight’s Low Voltage Explosion Proof LED Light
The HAL-48-33W-LED, low voltage, explosion proof LED light designed for hazardous locations where high output, a low profile and durability are critical issues. Constructed of high-grade aluminum and fitted with CREE LEDs, the HAL-48-33W-LED Explosion Proof LED Light provides operators with a rugged light source that can be mounted in tight spaces without sacrificing output […]
LED Explosion Proof Light with Pedestal Base or Magnetic Mount
The EPL-MB-161M-100 explosion proof LED light with aluminum base and magnetic mounting bracket produces 10,000 lumens and is designed to allow operators to use it as a portable pedestal mounted work light or a temporarily mounted area light. Non-sparking aluminum construction and an explosion proof LED lamp assembly provides high power light output and light […]
Larson Electronics’ Portable Explosion Proof Transformer/LED Light System
The EPL-TX-500-4-1M LED cart-mounted, explosion-proof, 500 KVA power transformer with LED light, provides the convenience and versatility of a wheeled cart-mounted transformer combined with a powerful LED light source. The transformer converts 220 V 50/60 Hz current to 120 Vac 50/60 Hz, distributes secondary output via four explosion proof receptacles, provides 10,000 lumen of light […]
Drop-in LED Driver Replacement for CCFL Inverters
Endicott Research Group (ERG) Inc. has introduced a new family of LED driver package configurations that provide footprint-compatibility with existing CCFL inverters. The DR Series of LED driver modules are designed in the same form factor as ERG DC-AC inverters already in the field. These are drop-in replacements that allow for a fast, easy upgrade […]
